Ricoh R10 Petunjuk Pembaruan Firmware - Halaman 5
Jelajahi secara online atau unduh pdf Petunjuk Pembaruan Firmware untuk Kamera Digital Ricoh R10. Ricoh R10 5 halaman. Lcd color balance adjustment file rewriting instruction manual
Juga untuk Ricoh R10: Brosur & Spesifikasi (6 halaman), Panduan Manajemen Warna (5 halaman)
Halaman Cetak
4. Update the firmware
1.
Making sure that the camera's power is
turned off, switch the mode dial to SCENE.
2.
While pressing the ADJ./OK button !,
hold down the 6 (Playback) button for 2-
3 seconds.
• A confirmation message for the firmware update is
displayed on the picture display.
3.
Press the ADJ./OK button $ to select
[Yes], and press the ADJ./OK button.
• The firmware update starts, and the following
message is displayed on the picture display.
[Checking rewrite file]
[Rewriting program]
The update is completed in about 40 seconds.
• The camera's power turns off automatically.
4.
The camera automatically turns off and restarts.
• If the message [Incorrect rewriting file] is displayed and the camera is automatically turned off, check the camera model
again and retry the update using the correct firmware.
• The firmware file copied to the SD memory card is deleted when you format the SD memory card. Delete the file if
necessary.
6 (Playback) Button
5
Mode dial
ADJ./OK Button