Ricoh 4372-002 Panduan Pengguna - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori Printer Ricoh 4372-002. Ricoh 4372-002 50 halaman. Printer driver

Chapter 2 Print from Windows Vista/Server 2008/7/Server 2008 R2

To print from Windows Vista/Server 2008/7/Server 2008 R2, you need to have the printer driver installed on the computer

before starting operation. Use the following steps to check connection with a printer and install the printer driver:

2.1

To print directly to the printer from Windows via a network, you need to build a TCP/IP environment for Windows and

configure the LPR port settings. Check Windows network settings and connection between the printer and computer

before installing the printer driver.

For information about how to configure the network for a printer unit, see the "User's Guide" that comes

with the printer. Alternatively, to print to the printer from Windows via a network, you can print via a Windows

shared printer other than the LPR printing described in this chapter.

Connect the printer and the computer to a network

and turn on the printer.

Start Windows and log on with the user name with

Administrator privilege.

First check Windows TCP/IP settings.

Select [Start] - [Control Panel] and open the

Control Panel.

Double-click the [Network and Sharing Center] icon.

When the [Network and Sharing Center] icon is not

displayed, select [Classic View] from the menu on the

left hand side of the window.

For Windows 7/Server 2008 R2,

change [View by:] on the right hand

side of the window from [Category] to [Lar

ge icons] or [Small icons].

Click the [View Status] in [Local Area Connection].

2-2