Ricoh aficio 1013 Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori Printer Ricoh aficio 1013. Ricoh aficio 1013 12 halaman.
Juga untuk Ricoh aficio 1013: Panduan Petunjuk Pengoperasian (28 halaman)

Halaman Cetak

Connecting the

Power and

Switching On

R WARNING:

• Connect the power cord directly into a wall outlet and

never use an extension cord.

• Connect the machine only to the power source

described on this Manual. Connect the power cord

directly into a wall outlet and do not use an exten-

sion cord.

• Do not damage, break or make any modiﬁ cations to

the power cord. Do not place heavy objects on it. Do

not pull it hard nor bend it more than necessary. These

actions could cause an electric shock or ﬁ re.

• If the power cord is damaged (exposure of the core,

disconnection,etc.), contact your service representa-

tive to change a new one. Operating the machine with

a damaged power cord may cause an electric shock

or ﬁ re.

Plug the cable into the outlet.

Important

• Power requirements : 220-240V, 50/60Hz

• Insert the power plug securely into the

outlet.

• Make sure that the outlet is near the ma-

chine and readily accessible.

• Do not connect other equipment to the

same outlet.

Turn the power switch on.

Note

• If "Call Service" appears on the display after the

power switch is turned on, turn the power switch

off, and check whether the tape has been removed

from the toner cassette and PCU.

See "1. Preparing the Toner Cassette".

Connecting the

Telephone

Line

There are similar sockets located at the left side

of the machine:

TEL: For the external telephone

LINE: Telephone line connection

Attach the ferrite core.

Loop the cable and attach the ferrite core as shown

in the illustration.

Keep going...