Ricoh Aficio AP4510 Panduan Tambahan - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Tambahan untuk Aksesori Printer Ricoh Aficio AP4510. Ricoh Aficio AP4510 38 halaman. Sap printing
Juga untuk Ricoh Aficio AP4510: Panduan Petunjuk Pengoperasian (32 halaman), Manual Penggantian (2 halaman), Prosedur Instalasi (2 halaman), Panduan Instalasi (4 halaman), Manual (12 halaman), Panduan Instalasi Cepat (2 halaman)

UNIX Configuration

HP-UX

❖ ❖ ❖ ❖ Adding the IP address and host name to the /etc/hosts file

The following line is added to the /etc/hosts file. The IP address and printer

host name which you previously entered in the installation script will be

used.

192.168.15.16 np # Network Printer

• 192.168.15.16 is the IP address, np is the host name, from # to the end of the

line is a comment.

Note

❒ The /etc/hosts file contains a list of the IP addresses and their host names

of all of the hosts communicating on the network. Each entry is delimited

with a space or a tab, and each line is separated with a return.

❒ If you do not use NIS or DNS, you must manually enter the IP address and

host name of each workstation using the network printer in the /etc/hosts

file.

❖ ❖ ❖ ❖ Registering the printer

The installation shell script registers the printer as a remote printer following

the procedure below.

Stop the scheduler.

/usr/lib/lpshut

/usr/lib/lpadmin -Pnp -v/dev/null -mrmodel

-ormnphost -orp"option" -ob3

• np is the printer name, nphost is the host name.

For more information about "option", see p.16 "Specifying the Device

Option".

"lp" will be assigned, if the option is not used.

Set the printer so that the print job is listed in the print queue.

/usr/lib/accept np

Set the printer to perform the print job.

/usr/lib/enable np

Restart the scheduler.

/usr/lib/lpsched