Ricoh LCIT RT5060 Buletin Teknis - Halaman 14
Jelajahi secara online atau unduh pdf Buletin Teknis untuk Aksesori Printer Ricoh LCIT RT5060. Ricoh LCIT RT5060 24 halaman.
Halaman CetakReissued:5-Dec-13
Model:
Large Capacity Tray RT5060 (D516)
RTB Reissue
The items in bold italics were corrected or added.
Subject:
Procedure for preventing JAM80 and Skews on LCT
From:
1st PP Tech Service Sec., PP Tech Service Dept.,
Classification:
Symptom
Jam 80 or paper skew with paper longer than 423.8mm (SRA3, DLT, etc.)
Cause
The drive and idle rollers on the LCT exit guide plate do not completely separate to release
the paper for the side-to-side registration adjustment.
The above symptoms could occur with LCTs manufactured after March 2013, because
these are side effects of the modification to the LCT exit guide plate in March 2013.
Before the modification in Mar 2013
Exit Guide Plate was originally arched in the direction indicated with the arrow.
After the modification in Mar 2013
The gap between the drive and idle rollers is insufficient and paper could get caught.
Exit Guide Plate was arched in the opposite direction for higher feed ability,
but caused side effects.
S/N of affected units
See the last pages of this bulletin.
T
echnical
Troubleshooting
Mechanical
Paper path
Product Safety
B
ulletin
Date:
6-Nov-13
Prepared by:
Part information
Electrical
Transmit/receive
Other (
)
PAGE: 1/7
No.:
RD516005
Shinnosuke Sasaki
Action required
Service manual revision
Retrofit information
Tier 2