Ricoh PJ WX5140 Panduan Pengguna - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Proyektor Ricoh PJ WX5140. Ricoh PJ WX5140 18 halaman.
Juga untuk Ricoh PJ WX5140: Spesifikasi (4 halaman)
Halaman Cetak1. Controlling the projector via a web browser
You can control the projector by using a web browser from a PC.
<Note>
-If you want to connect an existing network system, consult the network administrator for network
settings.
-Network settings such as password will be reset when you set "Default settings 2" > "Reset All"
in the projector menu system.
-In rare cases, the network function won't work properly due to electrostatic discharge or
something. Set "Default settings 2" > "Reset All" in such a case.
1.1 Connecting to the projector
1. Check IP address of the projector
Be sure to set "Default settings 1">"Control Method" to "LAN" in the projector menu system
before starting to set Network setting
Check IP address in "Default settings 2" > "Network setting" in the projector menu system. (See
page 43 on the projector use's manual)
2. Connect
Open your web browser and type in the IP address you checked. For example, type
"http://192.168.0.100" when IP address is displayed as the screen above.
<Note>
This web pages use Java Script. Please turn on Java Script in your browser.
2 2