Ricoh Aficio MP C5000 Panduan Pengguna - Halaman 21

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pemindai Ricoh Aficio MP C5000. Ricoh Aficio MP C5000 41 halaman. Papercut ricoh embedded manual
Juga untuk Ricoh Aficio MP C5000: Brosur & Spesifikasi (8 halaman), Panduan Referensi Cepat (42 halaman), Panduan Memulai Cepat (19 halaman), Panduan Memulai Cepat (45 halaman), Panduan Pemecahan Masalah (23 halaman)

PaperCut – Ricoh Embedded Manual

5. Once completed copying press the "Other function" hard key to return to the

PaperCut application.

6. Press the "Logout" button.

Back in the PaperCut application verify that the copier activity was recorded and the user's

account deducted.

1. Log in to PaperCut

2. Select the device from the "Devices" tab

3. Select the "Job Log" tab. This will list all recent copying activity on the copier. The

copying just performed as the test user should be listed.

4. Verify the details of the job (i.e. that the job was charged to the selected account).

5. In the log details, click on the "Charged To" account name to view the account's

details.

6. Selecting the "Job Log" tab will display all print/copy activity for the account, and will

show the test photocopying that was performed.

3.4 Scenario 3: Print release

The embedded application may also be used for print release. For full description of

PaperCut hold/release queues and release stations, please read the PaperCut manual.

Skip this scenario if hold/release queues will not be used at your site.

To perform print release testing a hold/release queue must be enabled:

1. In PaperCut, select the "Printers" tab.

2. Select the print queue (i.e. not the 'device') for the Ricoh MFD that will be used for

testing.

3. Enable the "Hold/release queue" option.

4. Press OK/Apply to save the changes. All printing to this queue will now be held until

released by a user.

The photocopier device must also be enabled as a "Print Release Station":

1. In PaperCut, select the "Devices" tab.

2. Select the Ricoh MFD's device.

3. Change the "Device Function" to "Copier & Print Release Station".

4. Select the print queue that was enabled for hold/release above. The Ricoh device

will allow jobs on the selected queues to be released.

Revision: 19

2012-10-26

21 of 41