Cisco 12000/10/16-BLWER= Manual Petunjuk Penggantian - Halaman 12

Jelajahi secara online atau unduh pdf Manual Petunjuk Penggantian untuk Router Jaringan Cisco 12000/10/16-BLWER=. Cisco 12000/10/16-BLWER= 18 halaman. Blower module and air filter for cisco 12016, cisco 12416, and cisco 12816 router

Halaman Cetak

Regulatory, Compliance, and Safety Information

This section includes regulatory, compliance, and safety information.

Translated Safety Warnings and Agency Approvals

The complete list of translated safety warnings and agency approvals is available in the Regulatory

Compliance and Safety Information for Cisco 12016, Cisco 12416, and Cisco 12816 Series routerss

publication (PN 78-4347-xx).

Electromagnetic Compatibility Regulatory Statements

FCC Class A Compliance

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant

to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio-frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference, in which case users will be

required to correct the interference at their own expense.

Modifying the equipment without Cisco authorization may result in the equipment no longer complying

with FCC requirements for Class A digital devices. In that event, your right to use the equipment may

be limited by FCC regulation and you may be required to correct any interference to radio or television

communication at your own expense.

You can determine whether your equipment is causing interference by turning it off. If the interference

stops, it was probably caused by the Cisco equipment or one of its peripheral devices. If the equipment

causes interference to radio or television reception, try to correct the interference by using one or more

of the following measures:

•

CISPR 22

This apparatus complies with CISPR 22/EN55022 Class B radiated and conducted emissions

requirements.

Cisco 12016, Cisco 12416, and Cisco 12816 Router Blower Module and Air Filter Replacement Instructions

Turn the television or radio antenna until the interference stops.

Move the equipment to one side or the other of the television or radio.

Move the equipment farther away from the television or radio.

Plug the equipment into an outlet that is on a different circuit from the television or radio. (That is,

make certain the equipment and the television or radio are on circuits controlled by different circuit

breakers or fuses.)

78-16083-02