Cisco 12816 Petunjuk Manual - Halaman 5

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Router Jaringan Cisco 12816. Cisco 12816 16 halaman. Blower module and air filter for cisco 12016, cisco 12416, and cisco 12816 router
Juga untuk Cisco 12816: Manual Petunjuk Pembongkaran Kemasan (28 halaman), Lembar data (9 halaman), Manual Petunjuk Penggantian (32 halaman), Manual Petunjuk Penggantian (18 halaman)

Using the Scissor-Jack Platform

Procedures for using the scissor-jack platform to move a fully loaded chassis are described in the

following sections:

•

Moving a Router onto the Scissor-Jack

To move a fully loaded router from an equipment rack and onto the scissor-jack platform, follow these

steps:

Working from the top of the chassis down, remove the screws that secure the chassis to the mounting

Step 1

flanges on the rack (five screws on each side of the chassis).

Position the scissor-jack platform in front of the rack-mounting platform installed in the bottom of the

Step 2

rack, with the screw on the scissor-jack platform facing away from the front of the router and the back

of the scissor-jack platform butted against the front of the rack-mounting platform.

Use the 3/4-in (19-mm) socket and ratchet wrench to turn the scissor-jack screw counterclockwise and

Step 3

expand the scissor-jack platform so that the top of the platform is level with the top of the rack-mounting

table under the chassis. (See

Do not attempt to lift the chassis with the handles on the back and sides of the chassis. These handles

Warning

are not designed to support the weight of the chassis, and should be used only to steady and guide

the chassis while it is being inserted into or removed from an equipment rack. To reduce the risk of

damage to the chassis and serious bodily injury, do not use these handles to lift or support the chassis.

78-15717-01

Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Guide

Cisco 12016, Cisco 12416, and Cisco 12816 Router Unpacking Instructions

Regulatory Compliance and Safety Information for the Cisco 12000 Series Internet Router

Moving a Router onto the Scissor-Jack

Moving a Router onto a Pallet

Figure

2.)

Cisco 12016, Cisco 12416, and Cisco 12816 Router Scissor-Jack Instructions

Using the Scissor-Jack Platform