Cisco 1720 Panduan Memulai Cepat - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Router Jaringan Cisco 1720. Cisco 1720 13 halaman. Cabling and installation
Juga untuk Cisco 1720: Lembar data (12 halaman), Panduan Memulai Cepat (13 halaman)
Halaman Cetak
5
Verify Your Installation
After the router is powered on, the following LEDs confirm that you have correctly installed your router.
Table 1
LEDs
LED
PWR
OK
LNK
WICØ OK and WIC1 OK
ETH ACT
WICØ ACT and WIC1
ACT
6
For More Information
For more information about installing or configuring your Cisco 1700 router, refer to the following documents available on
Cisco.com:
• Cisco 1700 Router Hardware Installation Guide
• Cisco 1700 Router Software Configuration Guide
• Cisco WAN Interface Cards Hardware Installation Guide
7
Obtaining Documentation
Cisco documentation and additional literature are available on Cisco.com. Cisco also provides several ways to obtain technical
assistance and other technical resources. These sections explain how to obtain technical information from Cisco Systems.
Cisco.com
You can access the most current Cisco documentation at this URL:
http://www.cisco.com/univercd/home/home.htm
You can access the Cisco website at this URL:
http://www.cisco.com
You can access international Cisco websites at this URL:
http://www.cisco.com/public/countries_languages.shtml
8
Location
What to Look For
Front
On when power is being supplied to the router.
Front
On when the router software is loaded and
functional.
Blinking when the router is running a power-on
self-test (POST). Continuous blinking can indicate
a problem with the router. Refer to the
"Troubleshooting" chapter in the hardware
installation guide for more information.
Rear
On when the router is correctly connected to the
local Ethernet network through the 10/100
ETHERNET port.
Rear
On when a WAN interface card is correctly
installed in the corresponding WAN interface card
slot.
Front
Blinking when there is network traffic on the local
Ethernet LAN.
Front
On solid or blinking when there is data traffic on
the WAN interface card port(s). Refer to Table 1-4
in the hardware installation guide for detailed
information.