ActronAir Serene 2 RC-02 Panduan Pengoperasian - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Kontrol Jarak Jauh ActronAir Serene 2 RC-02. ActronAir Serene 2 RC-02 16 halaman.
Halaman Cetak
Operation Manual
NOTES
the
button or changing the mode or adjusting the set temperature to less than 24
Pressing
Operation.
Once ECO is activated Fan can be adjusted and
GEAR Operation
Gear mode is a setting that can limit the energy consumption output of the air conditioner if the end user desires
reduction in their overall system energy usage.
This will impact performance in some conditions.
Press the
button to enter the following:
75%(up to 75% electrical energy consumption)
50%(up to 50% electrical energy consumption)
Previous setting mode.
06.08. Proximity Sensor
Proximity Sensor Function uses the indoor unit built-in infrared sensor to detect the room is occupied. When the
occupant is away for 30 minutes (or more), the unit will automatically lower the system's performance to save
energy.
The unit will automatically resume operation if the infrared sensor detects movements or activity inside the room
again.
When activated, remote control will display
06.09. SET Function
1. Press the SET button to enter the function setting.
2. Keep pressing the SET or
will flash on the remote control display.
3. Press the OK button to confirm.
Available SET functions are as follows:
Breeze away
Active Clean
• Breeze Away Function
This function prevents a direct airflow blowing on the occupants for more comfortable ambience. This is
achieved by aiming the louvre higher to avoid direct airflow.
NOTE
This feature is available under Cool, Fan and Dry mode only.
will be displayed on the LED.
to select the desired function. The symbol of the selected function
or
buttons
Fresh
Sleep
Follow Me
Operation Manual - Serene 2 Remote Controller
Document: 9590-4010 Ver. 1 200819
Remote Controller
o
C will cancel ECO
AP Mode
Breeze away
.....
13