Cisco 2525 Mempersiapkan Pemasangan - Halaman 4

Jelajahi secara online atau unduh pdf Mempersiapkan Pemasangan untuk Router Jaringan Cisco 2525. Cisco 2525 19 halaman. Troubleshooting guide
Juga untuk Cisco 2525: Panduan Konfigurasi (23 halaman), Panduan Konfigurasi (23 halaman), Ikhtisar (10 halaman), Panduan Pemecahan Masalah (4 halaman)

Halaman Cetak
Cisco 2525 Mempersiapkan Pemasangan

General Site Requirements

General Site Requirements
This section describes the requirements your site must meet for safe installation and
operation of your system. Ensure that your site is properly prepared before beginning
installation.

Site Environment

The routers can be placed on a desktop or mounted in a rack or on a wall. The location of
the routers and the layout of your equipment rack or wiring room are extremely important
for proper system operation. Equipment placed too close together, inadequate ventilation,
and inaccessible panels can cause system malfunctions and shutdowns, and can make router
maintenance difficult.
When planning your site layout and equipment locations, keep in mind the precautions
described in the next section, "Preventive Site Configuration," to help avoid equipment
failures and reduce the possibility of environmentally caused shutdowns. If you are
currently experiencing shutdowns or unusually high errors with your existing equipment,
these precautions may help you isolate the cause of failures and prevent future problems.

Preventive Site Configuration

The following precautions will help you plan an acceptable operating environment for your
router and will help you avoid environmentally caused equipment failures:
•
Electrical equipment generates heat. Ambient air temperature might not be adequate to
cool equipment to acceptable operating temperatures without adequate circulation.
Ensure that the room in which you operate your system has adequate air circulation.
•
Always follow the ESD-prevention procedures described in the section "Safety
Recommendations" earlier in this chapter to avoid damage to equipment. Damage from
static discharge can cause immediate or intermittent equipment failure.
•
Ensure that the chassis cover is secure. The chassis is designed to allow cooling air to
flow effectively within it. An open chassis allows air leaks, which may interrupt and
redirect the flow of cooling air from internal components.
2-4 Cisco 2524 and Cisco 2525 Router User Guide