Cisco 2600 Series Panduan Instalasi - Halaman 20

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Router Jaringan Cisco 2600 Series. Cisco 2600 Series 22 halaman. Configuring adsl wic to support pppoe clients
Juga untuk Cisco 2600 Series: Panduan Instalasi (12 halaman), Catatan Rilis (32 halaman), Konfigurasi (15 halaman), Catatan Aplikasi (41 halaman), Lembar data (6 halaman), Lampiran (15 halaman), Ikhtisar (13 halaman), Panduan Memulai Cepat (2 halaman), Manual (5 halaman)

Connecting to a Network

Connecting to a WAN

Table 3-2

information about connecting and configuring WAN and voice cards, refer to the online document Cisco

WAN Interface Cards Hardware Installation Guide, available online at Cisco.com and the

Documentation CD-ROM that came with your router.

Your router includes asynchronous serial console and auxiliary ports. These ports provide administrative

access to your router either locally (with a console terminal) or remotely (with a modem).

Cisco provides cables and adapters to connect your router to a PC or modem. These will include:

Use a rollover cable to connect to the asynchronous serial console and auxiliary ports. You can identify

a rollover cable by comparing the two modular ends of the cable. Holding the cables side-by-side, with

the tab at the back, the wire connected to the pin on the outside of the left plug should be the same color

as the wire connected to the pin on the outside of the right plug. (See

Figure 3-26 Identifying a Rollover Cable

Cisco 2600 Series Routers Hardware Installation Guide

3-20

summarizes the WAN and voice connections for the Cisco 2600 series routers. For more

One RJ-45 console cable (Blue)

–

One RJ-45 auxiliary cable (Black)

–

One RJ-45-to-DB-9 adapter (Labeled TERMINAL)

–

One RJ-45-to-DB-25 adapter (Labeled MODEM)

–

One RJ-45-to-DB-9 adapter cable (Blue)

–

One RJ-45-to-DB-25 adapter cable (Black)

Pin 1

Pin 1 and pin 8

should be the

same color

Pin 8

Chapter 3

Installing the Router

Figure

3-26.)

OL-2171-02