Cisco 2621 Operasi - Halaman 6
Jelajahi secara online atau unduh pdf Operasi untuk Router Jaringan Cisco 2621. Cisco 2621 25 halaman. Gateway-pbx interoperability: lucent/avaya definity g3si with e1 pri net5 signaling
Juga untuk Cisco 2621: Panduan Pengguna (35 halaman), Panduan Pengguna (20 halaman)
Halaman Cetak
The 2621XM/2651XM Router
Table 2
Cisco 2621XM and Cisco 2651XM Front Panel LEDs and Descriptions
LED
Indication
Power
Green
Off
1
RPS
Green
Off
Blink
Activity
Off
Blink (500 ms ON, 500 ms OFF) In ROMMON, no errors
Blink (500 ms ON, 500 ms OFF,
2 sec between codes)
Blink (less than 500 ms)
RPS = Redundant Power System
1.
All of these physical interfaces are separated into the logical interfaces from FIPS 140-2 as described in
Table
Table 3
Router Physical Interface
10/100BASE-TX LAN Port
WIC Interface
Network Module Interface
Console Port
Auxiliary Port
10/100BASE-TX LAN Port
WIC Interface
Network Module Interface
Console Port
Auxiliary Port
10/100BASE-TX LAN Port
WIC Interface
Network Module Interface
Power Switch
Console Port
Auxiliary Port
Cisco 2621XM and Cisco 2651XM Modular Access Routers with AIM-VPN/EP FIPS 140-2 Non-Proprietary Security Policy
6
Description
Power is supplied to the router and the router is operational
The router is not powered on
RPS is attached and operational
No RPS is attached
RPS is attached, but has a failure
In the Cisco IOS software, but no network activity
In ROMMON, error detected
In the Cisco IOS software, the blink rate reflects the level of activity
3:
Cisco 2621XM and Cisco 2651XM FIPS 140-2 Logical Interfaces
FIPS 140-2 Logical Interface
Data Input Interface
Data Output Interface
Control Input Interface
OL-6262-01