Cisco 2691 Series Panduan Pengguna - Halaman 25

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Router Jaringan Cisco 2691 Series. Cisco 2691 Series 48 halaman. Modular routers
Juga untuk Cisco 2691 Series: Menginstal dan Memformat (34 halaman), Lembar data (8 halaman), Panduan Memulai Cepat (29 halaman)

Halaman Cetak

Figure 18

Port adapter

lever

The NPE-400 uses an RM7000 microprocessor that operates at an internal clock speed of 350 MHz. The

NPE-400 uses SDRAM for storing all packets received or sent from network interfaces. The SDRAM

memory array in the system allows concurrent access by port adapters and the processor. The NPE-400

has three levels of cache: a primary and a secondary cache that are internal to the microprocessor, and a

tertiary 4-MB external cache that provides additional high-speed storage for data and instructions.

The Cisco 7206VXR router comes equipped with one 280W AC-input power supply. (A 280W DC-input

power supply option is available.) A power supply filler plate is installed over the second power supply

bay. A fully configured Cisco 7206VXR router operates with only one installed power supply; however,

a second, optional power supply of the same type provides hot-swappable, load-sharing, redundant

power.

Cisco 7206 VXR NPE-400 Module Interfaces

The interfaces for the router are located on the front panel Input/Output (I/O) Controller, with the

exception of the power switch and power plug. The module has two Fast Ethernet (10/100 RJ-45)

connectors for data transfers in and out. The module also has two other RJ-45 connectors for a console

terminal for local system access and an auxiliary port for remote system access or dial backup using a

modem.

Figure 19

panel displays whether or not the router is booted, if the redundant power is attached and operational,

and overall activity/link status.

Cisco 1721, 1760, 2621XM, 2651XM, 2691, 3725, and 3745 Modular Access Routers and 7206-VXR NPE-400 Router FIPS 140-2 Non-Proprietary

OL-6083-01

The Cisco 1721, 1760, 2621XM, 2651XM, 2691, 3725, 3745, and 7206 VXR NPE-400 Routers

The Cisco 7206 VXR NPE-400 Router

Cisco 7200

Series

I/O controller

PC card slots

shows the front panel LEDs, which provide overall status of the router operation. The front

Port adapters

Auxiliary

Optional Fast Ethernet port

(MII receptacle and RJ-45 receptacle)

ETHERNET-10BFL

FAST ETHERNET INPUT/OUTPUT CONTROLLER

Console

port