Cisco 2801 - Integrated Services Router Panduan Pengguna - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Router Jaringan Cisco 2801 - Integrated Services Router. Cisco 2801 - Integrated Services Router 29 halaman. 2800 series integrated services routers
Juga untuk Cisco 2801 - Integrated Services Router: Lembar data (20 halaman), Panduan Memulai Cepat (47 halaman)
Halaman Cetak
Cisco 1841 and Cisco 2801 Routers
The module's internal Flash does not store any IOS images. The CF card must be used to store the valid
IOS image. The CF card that stores the IOS image is considered an internal memory module, because
the IOS image stored in the card may not be modified or upgraded. The card itself must never be removed
from the drive. Tamper evident seal will be placed over the card in the drive.
The Cisco 2801 Cryptographic Module Physical Characteristics
Figure 3
The Cisco 2801 router case
The Cisco 2801 router is a multiple-chip standalone cryptographic module. The router has a processing
speed of 240MHz. Depending on configuration, either the installed AIM-VPN/BPII-Plus module,
onboard FPGA or the IOS software is used for cryptographic operations.
The cryptographic boundary of the module is the device's case
discussed in this document is provided by components within this cryptographic boundary.
The interfaces for the router are located on the front and rear panel as shown in
respectively.
Figure 4
Cisco 2801 Front Panel Physical Interfaces
7
Figure 5
Cisco 2801 Rear Panel Physical Interfaces
3
Cisco 1841 Integrated Services Router with AIM-VPN/BPII-Plus and Cisco 2801 Integrated Services Router with AIM-VPN/EPII-Plus
6
6
4
5
9
11 12
13
8
10
Figure
3
14
3. All of the functionality
Figure
4and
Figure
2
1
14
2
1
OL-8719-01
5,