Cisco 2851 - Integrated Services Router Panduan Memulai Cepat - Halaman 19
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Router Jaringan Cisco 2851 - Integrated Services Router. Cisco 2851 - Integrated Services Router 47 halaman. Power up and initial configuration procedures
Juga untuk Cisco 2851 - Integrated Services Router: Instalasi dan Peningkatan (21 halaman), Lembar data (20 halaman), Panduan Pengguna (25 halaman), Konfigurasi (10 halaman)
Halaman Cetak
Figure 16
NEBS-Compliant Chassis Ground Connection on Cisco 2821 or Cisco 2851 Chassis
A= ACT
S= SPE
A= FDX
A
ED
FE 0/1
A= LIN K
F
FE 0/0
A
S
F
L
S
L
PVD M2
PVD M1
PVD M0
AIM 1
AIM 0
Figure 17
Chassis Ground Connection Using Ring Terminal on Cisco 2821 or Cisco 2851 Chassis
A= ACT
S= SPE
A= FDX
A
ED
FE 0/1
A= LIN K
F
FE 0/0
A
S
F
L
S
L
PVD M2
PVD M1
PVD M0
AIM 1
AIM 0
5
Connect Cables
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Warning
The ISDN connection is regarded as a source of voltage that should be inaccessible to user contact. Do not attempt
to tamper with or open any public telephone operator (PTO)-provided equipment or connection hardware. Any
hardwired connection (other than by a nonremovable, connect-one-time-only plug) must be made only by PTO staff
or suitably trained engineers. Statement 23
Warning
This unit is intended for installation in restricted access areas. A restricted access area can be accessed only
through the use of a special tool, lock and key, or other means of security. Statement 1017
Warning
Do not work on the system or connect or disconnect cables during periods of lightning activity. Statement 1001
Ground lug
Ring terminal
attachment
19