Epson EMP-9300 Panduan Referensi Cepat - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Referensi Cepat untuk Proyektor Epson EMP-9300. Epson EMP-9300 16 halaman. Esc/vp21 command user's guide for business projectors
Juga untuk Epson EMP-9300: Panduan Pengoperasian (36 halaman), Panduan Pengguna (24 halaman), Panduan Pengguna (25 halaman), Panduan Pengguna (25 halaman), Panduan Pengguna (28 halaman), Panduan Pengguna (28 halaman)

Halaman Cetak
Epson EMP-9300 Panduan Referensi Cepat
Select the images to be projected.
If only one signal source is connected, images from that source will be projected automatically.
If more than one device is connected to the projector, use the [Source] button to select the image source to be projected.
To select images to be
projected while viewing
all images being input
(Preview Function)
If the source does not
change to a laptop PC
If using the
,
or
pressing the button repeatedly.
Active window
Computer1
Computer1 (Analog-RGB)
Computer2
DVI
BNC
Video
S-Video
Examples of changing output
NEC
Panasonic
TOSHIBA
IBM
SONY
FUJITSU
After startup, change the Control
Macintosh
Panel adjustment so that mirroring
is active
buttons to select the source, you can change the signal setting by
1. Press the
button.
The image can be changed directly by selecting the desired
image source with the [Source] button.
2. To view the images in more detail, switch to the active window.
Tilt the
button to select an image and then press the
button.
3. Project the images in the active window.
Press the
button.
User's Guide "Selecting an Image Source While
Viewing Projected Images (Preview Function)"
You may need to change the output destination using the
keyboard or by changing settings.
To change, hold down the
(with a symbol such as
Once the setting is changed, projection will start after a short
period.
If images are still not projected after carrying out the above,
see p.12.
key and press the
key
or
on it).
Computer documentation