Cisco 3600 Series Catatan Konfigurasi - Halaman 19

Jelajahi secara online atau unduh pdf Catatan Konfigurasi untuk Router Jaringan Cisco 3600 Series. Cisco 3600 Series 25 halaman. Memory upgrade
Juga untuk Cisco 3600 Series: Ikhtisar Produk (10 halaman), Petunjuk Peningkatan (30 halaman), Panduan Pemilik (17 halaman), Catatan Aplikasi (41 halaman), Panduan Konfigurasi (36 halaman), Panduan Pengguna (25 halaman), Lampiran (15 halaman), Panduan Pengguna (7 halaman), Manual (5 halaman), Catatan Konfigurasi (23 halaman), Catatan Konfigurasi (18 halaman)

Follow these steps to replace the ROM:

Locate the ROM on the motherboard. (See Figure 14 and Figure 15.)

Step 1

Figure 14

Cisco 3620 ROM Location

ROM

Step 2

Gently remove the old ROM with a ROM extraction tool or a small ﬂat-blade screwdriver,

and set it aside.

Insert the new ROM in its socket in the orientation shown in Figure 14 or Figure 15, being

Step 3

careful not to bend or crush any of the bottom pins. To straighten out a bent pin, use

needlenose pliers. Align the notch in the new ROM with the notch in the ROM socket,

ignoring the orientation of the label.

The notch on the ROM must match the notch on the socket on the card. Installing the ROM

Caution

backward will damage it.

When you are ﬁnished replacing the ROM, continue with the section "Replacing the Cover" later in

this document.

Cisco 3600 Series Memory Upgrade Configuration Note

Upgrading the ROM