Cisco 3725 Series Petunjuk Peningkatan - Halaman 11

Jelajahi secara online atau unduh pdf Petunjuk Peningkatan untuk Router Jaringan Cisco 3725 Series. Cisco 3725 Series 30 halaman. Non-proprietary security policy
Juga untuk Cisco 3725 Series: Ikhtisar Solusi (16 halaman), Panduan Pengguna (48 halaman), Panduan Instalasi (12 halaman)

Halaman Cetak

Removing the Cisco 3725 Router Cover

To remove the router cover, follow these steps:

Attach an ESD-preventive wrist strap and ensure that it makes good contact with your skin. Connect the

Step 1

equipment end of the wrist strap to the metal back plate of the chassis, avoiding contact with the

connectors.

Turn off the power and unplug the power cord.

Step 2

Before opening the unit, disconnect the telephone-network cables to avoid contact with

Warning

telephone-network voltages. Statement 1041

Disconnect all network-interface cables from the rear panel.

Step 3

Place the chassis so that the rear panel faces you.

Step 4

Remove the six screws located on top of the cover. Set the screws aside in a safe place.

Step 5

Lift the front edge of the cover up to a 45-degree angle so that it clears the front of the chassis. (See

Step 6

Figure 1

Slide the cover to the side, away from the side with the fans, until the tabs are free from the slots. (See

Step 7

Figure 1

OL-5423-02

part 1.)

part 2.)

Upgrading System Memory in Cisco 3725 Routers

Upgrading System Memory in Cisco 3700 Series Routers