Epson EMP-X3 Setup Manual - Halaman 25

Jelajahi secara online atau unduh pdf Setup Manual untuk Proyektor Epson EMP-X3. Epson EMP-X3 28 halaman. Esc/vp21 command user's guide for business projectors
Juga untuk Epson EMP-X3: Panduan Memulai Cepat (16 halaman), Spesifikasi (2 halaman), Panduan Pengguna (25 halaman), Panduan Pengguna (25 halaman), Brosur & Spesifikasi (4 halaman), Panduan Pengguna (28 halaman), Panduan Pengguna (28 halaman)

Halaman Cetak

● Adjusting Position and Focus ●

(Setting up for the first time or after moving)

■ Raising the Projection Position (Adjusting the front foot)

When moving the projector, make

sure the front foot is retracted.

Correcting Keystone Distortion

You can adjust the vertical tilt to a maximum

of about 30°*.

Wide Top

* The greater the angle of tilt, the harder the

image is to focus. Setup the projector at a

lower angle of tilt.

■ Adjusting Focus

After keystone correction and

sharpness adjustments, the image

may be unfocused.

● Turning the Projector off ●

Turn off all connected equipment.

Press

twice on the remote

control or control panel.

* If you turn the power on straight after turning it off, the time before projection starts becomes longer than usual.

Normal

Wide Base

Foot Adjust

Lever

You can adjust the front foot to raise the

projection angle up to a maximum of 10°.

• When the "Auto Keystone" function

is turned "Off" in the configuration

menu, automatic keystone

correction is not performed.

(EMP-82/62 only)

• You can also make keystone

corrections from the configuration

menu.

User's Guide "Settings Menu"

• Hold down

more than one second to reset the

correction value to the default

setting.

• Adjust the horizontal tilt by turning

the left rear foot.

Rear Adjustable

Foot

Extend

■ Adjusting Projection Size

Enlarge

After the confirmation buzzer beeps

twice, unplug the power cable.

Electricity is consumed if only the

projector's power is turned off.

Attach the lens cover.

and press

for

Retract

Reduce