Cisco 4000 Series Manual - Halaman 15

Jelajahi secara online atau unduh pdf Manual untuk Router Jaringan Cisco 4000 Series. Cisco 4000 Series 18 halaman. Upgrading memory
Juga untuk Cisco 4000 Series: Mempersiapkan Pemasangan (11 halaman), Panduan Instalasi (18 halaman), Manual Penggantian (16 halaman), Panduan Peningkatan (24 halaman)

Caution

Seul le système d'alimentation redondant Cisco (RPS modèle PWR600-AC-RPS) doit

servir à alimenter le dispositif externe.

Das externe Gerät darf nur mit einer redundanten Stromversorgung von Cisco, Modell

PWR600-AC-RPS, betrieben werden.

Para alimentar el dispositivo externo, usar exclusivamente el sistema de alimentación

redundante (redundant power system = RPS) Cisco, modelo PWR600-AC-RPS.

Overview

The Cisco RPS provides power system redundancy to external devices (such as routers,

switches, or hubs). The system includes two fully redundant AC input power modules and

four DC output power modules for connection to external devices. The Cisco RPS supports

the following power source configurations: quasi-redundant and fully redundant.

Quasi-Redundant Power

The Cisco RPS can provide a quasi-redundant power source for up to four external devices

that use 150W or less each. You can use a one-to-one cable (one connector at each end of

the cable) to connect up to four external devices to the four DC output power modules, as

shown in Figure 1-5. When using one-to-one cables, the power source is quasi-redundant

because there are two AC input power modules for the Cisco RPS and one DC power output

module for each external device. The AC input to the Cisco RPS is fully redundant, but the

DC output to the external devices is not.

Figure 1-5

Use the Cisco RPS (model PWR600-AC-RPS) only to power the external device.

Quasi-Redundant Configuration

Overview of the Cisco 4000 Series Routers 1-15

Cisco RPS Support