Epson EX100 Pengaturan Cepat

Jelajahi secara online atau unduh pdf Pengaturan Cepat untuk Proyektor Epson EX100. Epson EX100 2 halaman. Warranty statement
Juga untuk Epson EX100: Spesifikasi Produk (2 halaman), Daftar Bagian (1 halaman), Pernyataan Kesesuaian (4 halaman)

Halaman Cetak
Epson EX100 Pengaturan Cepat
EX100
Quick Setup
Connect the projector
to your notebook
Before using the projector, make sure you read the safety instructions in
the User´s Guide on your projector CD.
1
Locate the required cables:
Power cord
2
Connect the computer cable to the blue Computer/Component Video
port on the projector.
3
Connect the other end to your notebook's video-out
or
monitor port.
4
Connect the power cord to the projector, then plug the other end
into an electrical outlet.
Turn on your equipment
1
Turn on your notebook.
2
Open the A/V Mute slide (lens cover).
NOTE:
The slide must be opened completely.
*411491900*
*411491900*
Follow these instructions to connect
the projector to your notebook. For
other setup options, such as using the
included VGA-to-Component Video
adapter, see your User's Guide.
VGA computer cable
3
Make sure the Power light is orange and not flashing.
Power light
Power button
4
Press the
Power button to turn on the projector.
CAUTION: Before unplugging the projector...
Shut down the projector properly:
1. Press the
Power button twice.
2. When the orange light stops flashing and the projector beeps,
you can unplug the projector.

Adjust the image

1
If you've turned on your notebook and you don't see an image,
press the Source Search button on the projector or remote control
to select the image source.
NOTE:
If you still see a blank screen or have other display problems,
see the troubleshooting tips on the back of this sheet.
2
To raise the image, press the blue foot release button for the front
adjustable foot and lift the front. Release the button to lock the foot
in position.
3
Turn the focus ring to sharpen the image.
Turn the zoom ring to reduce or enlarge the image.
Focus
Zoom
4
If your image looks like
or
to one side of the screen at an angle. Place it directly in front of the
center of the screen, facing the screen squarely.
5
If your image looks like
or
on the projector to correct it.
Turn over
, you've placed the projector off
, press the
or
buttons