ACDC Dynamics EPS-1500B Panduan Pengguna - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Catu Daya ACDC Dynamics EPS-1500B. ACDC Dynamics EPS-1500B 5 halaman. Emergency power system

Halaman Cetak

1. INTRODUCTION

The EPS/CPS includes an inverter/charger/ power supply all-in-one unit.

It consists of an inverter charger and rechargeable battery they are housed in a portable enclosure.

You can use it to power most of your electrical appliances at home when mains power is not available.

In addition, you can use it as a charger to re-charge other 12V sealed lead acid battery.

2. FEATURES

12V DC to 220-240V AC Modified sine wave or pure sine wave output

Charger Function

Continuous Power up to from 150W-3000W

Overload protection

150W-1000W single AC output

1500W-3000W dual AC outlets for running multiple electrical appliances

Installed with maintenance free sealed lead acid battery, extra battery can be added by terminal block

3. MAIN CHARACTERISTICS

Make sure the EPS is switched off before connecting to AC wall socket .

Use the AC power cord provided in the package.

Please remember to switch off the EPS before connecting on the electrical appliances to the outlet.

Plug the electrical appliance into the AC output socket (on the side panel) and switch the EPS on.

The appliance connected to the EPS will work.

When the EPS is connected to an AC wall socket, it is an AC source to power the electrical appliances connected.

At the same time, the battery is being recharged.

When he AC source is cut off, the battery powers the electrical appliances connected and the battery is discharged.

You are advised not to keep recharging the battery continuously when the battery is at full or 80% capacity.

Overcharging will make the battery damaged.

When full charged LED turn green, please remove the charger if long time not to use it.

4. MATERIAL INDICATION

150W-600W

1. INPUT CABLE SOCKET

8. OUTPUT SOCKET

2. CHARGER ON/OFF SWITCH

9. NEGTIVE TERMINAL BLOCK FOR EXTERNAL BATTERY

3. FULLY CHARGED LED INDICATOR

10. POSITIVE TERMINAL BLOCK FOR EXTERNAL BATTERY

4. CHARGER WORKING STATUS LED

11. VENTILATION HOLE(1500W-3000W)

5. INVERTER ON/OFF SWITCH

12. INPUT CABLE

6. INVERTER WORKING STATUS LED

13. USER MANUAL

7. FAULT LED

14. FUSE

Note:

1. 1X65ah battery can be installed in 150-300W system.

1 x 100ah battery has been installed in 600-3000W system.

The battery terminal block is used for extra battery which will be parallel in the system

2. 150W-1000W with one AC output and 1500-3000W with dual output.

1500W-3000W