Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Catatan Instalasi - Halaman 5

Jelajahi secara online atau unduh pdf Catatan Instalasi untuk Router Jaringan Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 18 halaman. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Juga untuk Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion: Catatan Instalasi (14 halaman), Panduan Solusi (17 halaman), Catatan Instalasi (46 halaman), Buku Putih (19 halaman), Deskripsi (1 halaman), Buletin Produk (6 halaman), Pemberitahuan (4 halaman), Lembar data (9 halaman), Lembar data (18 halaman), Buku Putih (18 halaman), Panduan Konfigurasi (8 halaman), Catatan Instalasi (28 halaman), Panduan Pemecahan Masalah (11 halaman), Panduan Pengguna (17 halaman), Catatan Instalasi (24 halaman), Manual (19 halaman), Catatan Instalasi (36 halaman)

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Catatan Instalasi
To remove the MSFC2 from the supervisor engine, follow these steps:
Step 1
Upload the current configuration to a server. On any modules running Cisco IOS software, save the
running configuration.
Remove the supervisor engine from the Catalyst 6500 series switch. (Refer to the Catalyst 6500 Series
Step 2
Module Installation Guide for removal instructions.)
Place the supervisor engine on an antistatic mat or foam.
Step 3
Remove the securing screws and cap nut that secure the MSFC2 to the supervisor engine. (See
Step 4
for an MSFC2 shipped before November 2001, or see
2001.)
Note
Figure 1
Hold here
78-14357-02
The MSFC2 shipped after November 2001 is physically smaller than the previous MSFC2 and
is not secured with a cap nut. (See
MSFC2 Shipped Before November 2001—Removing Securing Screws and Cap Nut
Hold here
SWITCH LOAD
WS-X5530
100%
1%
SUPERVISOR ENGINE I I I
CONSOLE
Catalyst 6500 Series Supervisor Engine 1A DRAM Upgrade Installation Note
Figure 2
for an MSFC2 shipped after November
Figure
2.)
Removing the MSFC2
Figure 1
5