ACDC Dynamics FL-AC12 Petunjuk - Halaman 2

Jelajahi secara online atau unduh pdf Petunjuk untuk Sensor Keamanan ACDC Dynamics FL-AC12. ACDC Dynamics FL-AC12 2 halaman. Glass break detector

Halaman Cetak

Jumper adjustment

JP1—SHOCK/ GLASS adjustment

SHOCK—the setting is for low frequency

adjustment with the help of potentiometer;

GLASS—the setting is for high frequency

adjustment with the help of potentiometer;

OFF —this setting is for work.

JP2—LED indication alarm

Circuit shot— latch enable

Circuit not shot—latch disable

JP3—sense adjustment

Circuit shot —sense fall 50%

Circuit no shot—sense not fall

SPECIFICATIONS:

Power supply: 9~16VDC

Detecting distance

：

GLASS 8~9m

Current

：

s tandby

：

1 4mA

working

2 6mA

：

Alarm output

0 .1A/28VDC

：

tamper switch

：

0 .1A/28VDC

humidity

9 5%MAX

：

operation temperature

：

-20

C~50

LED

：

yellow

glass breaking signal

red

alarm signal

green

shock signal

GLASS BREAK ADJUSTMENT

Place the jumper on JP1 above the

GLASS mark. Green(SHOCK) LED is

constantly ON, now you can adjust the

sensitivity

turning

the

GLASS

potentiometer.

Simulate glass break sound and turn

the GLASS potentiometer clockwise to

increase

sensitivity

and

counter

clockwise to decrease sensitivity until

the yellow and red LEDS are lighting for

each glass break sound.

When the jumper is set for GLASS

adjustment, only the high frequency

sound of glass breaking is detected.

SHOCK ADJUSTMENT

Place the jumper on JP1 above the

SHOCK mark. yellow(GLASS) LED is

constantly ON, now you can adjust the

sensitivity

turning

the

SHOCK

potentiometer.

Hit gently on the protected glass and

turn

the

SHOCK

potentiometer

clockwise to increase sensitivity and

counterclockwise to decrease sensitivity

until the green and red LEDS are

lighting for each glass break sound.

When the jumper is set for SHOCK

adjustment, only the low frequency

of the shock signal prior to glass

breaking is detected.