Epson MovieMate 55 Panduan Cepat - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Cepat untuk Proyektor Epson MovieMate 55. Epson MovieMate 55 24 halaman. Epson moviemate 55: quick start
Juga untuk Epson MovieMate 55: Lembar Spesifikasi (2 halaman), Daftar Bagian (1 halaman)

Halaman Cetak

■

Epson MovieMate should be directly in front

of the screen or wall, facing straight ahead

(at a 90-degree angle to the surface).

■

If the image is too low, you can raise it by

extending the feet to tilt Epson MovieMate

up. This causes the image to lose its

rectangular shape. You can adjust the shape

using the keystone buttons on Epson

MovieMate or on the remote control. See

page 10 for instructions.

■

The farther you place Epson MovieMate

from the screen or wall, the larger the image will be.

If you want an 80-inch diagonal widescreen image, place Epson MovieMate about

7.8 feet away from the wall or screen. The following diagram shows the

approximate image size (measured diagonally) at various distances.

Caution:

Epson MovieMate should not be exposed to water, smoke, moisture, dust, direct heat

or sunlight, or left outside for long periods of time. These environmental factors may

cause damage to internal electronics over time. See the warranty on page 19 for

additional details.

Unpacking and Setting Up