Epson PowerLite Home Cinema 3010 Pengaturan Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Pengaturan Cepat untuk Proyektor Epson PowerLite Home Cinema 3010. Epson PowerLite Home Cinema 3010 4 halaman. Home theater projector
Juga untuk Epson PowerLite Home Cinema 3010: Brosur & Spesifikasi (4 halaman)

Halaman Cetak

Adjust the image

1
If you don't see an image, press the Source buttons on the projector or
the remote control to select the image source.
Note: If you still see a blank screen or have other display problems, see
the troubleshooting tips on the back of this sheet.
2
To raise the image, adjust the front feet as shown below.
3
Turn the zoom ring to reduce or enlarge the image.
4
Turn the focus ring to sharpen the image.
5
If your image looks like
or
one side of the screen at an angle. Use the horizontal keystone slider on
the projector to correct it. Or place the projector directly in front of the
center of the screen, facing the screen squarely.
6
Your projector automatically adjusts images that look like
but if necessary you can press the
correct this.
, you've placed the projector off to
or
,
or
buttons on the projector to

Using the remote control

Make sure the batteries are installed as shown (two AA batteries).
Turn projector on
Switch between
2D and 3D
Access projector
menus
For more information on using the remote control, see the online User's
Guide.
Project wirelessly
(PowerLite Home Cinema 3010e only)
Follow these steps to use the included WirelessHD Transmitter (PowerLite
Home Cinema 3010e only) to wirelessly transmit HD content to your projector.
1
Place the transmitter within 30 feet (10 m) of the projector. Make sure
the front of the transmitter faces the front of the projector. See the
online User's Guide for more information on the WirelessHD transmission
range.
Note: Do not place the transmitter on a metal surface, as this may
interfere with the signal.
2
Plug the AC adapter into the transmitter and a wall outlet.
3
Connect an HDMI cable to your video device and the HDMI port on the
side of the transmitter.
4
Turn on the power switch on the back of the transmitter.
5
Turn on your video device and begin playback.
6
Turn on the projector.
7
Press the
button on the projector remote control.
See the online User's Guide for more information on adjusting and configuring
the WirelessHD connection.
Turn projector off
Choose which source
to display
Navigate projector
menus
Turn off projector
display