Ace ACE Easy Panduan Pengoperasian - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Peralatan Uji Ace ACE Easy. Ace ACE Easy 6 halaman.

Halaman Cetak

ACE Easy Breathalyzer

Operating Manual

Thank you for purchasing our ACE Easy Breathalyzer. It measures

alcohol concentration in human breath using a semiconductor

sensor and calculates the blood alcohol level. The device must

only be used pursuant to the instructions mentioned in this manual.

In case of any questions you may contact the distributor (ACE)

by email to [email protected], www.ace-instruments.net.

Short description:

The ACE Easy Breathalyzer is

a digital semiconductor alcohol

testing device, which can be

operated by only one button

and shows reliable test results

in % BAC (default setting).

The legal limit in the USA is

0.08% BAC (status: Oct 2016).

You can interprete the test

result 1:1 (e.g. the display

shows 0.03 = 0.03% BAC).

To maintain the measurement

accuracy of this breathalyzer

it should be calibrated

regularely. For a calibration

service you can send the

device to ACE Instruments

(see www.ace-instruments.net).

For each breath test a new

mouthpiece is required (to get

a most accurate test result).

Scope of delivery:

Digital ACE Easy Breathalyzer

(3 digits, 2 decimals) with

semiconductor sensor

5 mouthpieces (Figurative image

of mouthpiece on the pictures in

this manual)

2 pieces AA batteries (1.5V, LR6,

Alkaline), already inside the

device

Quick Start Guide

Operating Manual

Label of individual components:

Mouthpiece

Sensor opening

Operation button

Digital LCD display

(3 digits, 2 decimals)

Air outlet

(always keep this

part unblocked)

Battery compartment

cover

This way you receive results that

are as accurate as possible:

a) Wait at least 15 minutes after

your last sip of alcohol. Do not

eat, drink or smoke during that

time.

b) Do not open the casing.

c) Do not keep the breathalyzer

in cold, hot, moist or badly

ventilated places.

d) Keep the breathalyzer out of

the reach of children.

e) Conduct three inlet tests after

long storage before conducting

the actual alcohol test.

f) Do not drop the breathalyzer.

g) Change the battery if it is

depleted. Diminished battery

capacity leads to incorrect test

results.

h) Do not conduct tests in loud

(sound waves disrupt the sen-

sor), drafty or poorly ventilated

places.

i) After a test result of 0.100% BAC

(% BAC = basic setting) or high-

er the sensor needs rest time.

In this case wait at least three

minutes before the next test.

j) Do not conduct tests in very

cold, very hot or an unventilat-

ed, smoky ambience.

k) Store the breathalyzer in a way

to avoid penetration by dust

or liquids.

l) Blowing too hard may cause

damage to the sensor as saliva

flows into it.

Preparation for the test:

1. If you use the breathalyzer for

the first time, then push the

battery compartment cover on

the back downwards. Remove

the small paper inside the

battery compartment (this paper

prevents the 2 inserted batteries

from discharging). Close the

battery compartment cover

again. If you change the

batteries please mind their

polarity (+/- pole).

2. a) Put a mouthpiece or a straw

on the mouthpiece connection,

which is on the side of the

device. Make sure it is attached

properly. Use a different mouth-

piece or straw for each test

person. Avoid blowing cigarette

smoke into the tester!

b) If you want to test yourself

without a mouthpiece or straw

push the power button and

as soon as you see "0" on the

display, simply blow directly

towards the mouthpiece con-

nection (blow contantently like

you would whistle).

ACE INSTRUMENTS

RECOMMENDS:

ALWAYS USE A NEW MOUTH-

PIECE FOR EACH PERSON AND

TEST THAT IS CONDUCTED. ACE

INSTRUMENTS ASSUMES NO

LIABILITY FOR ANY DAMAGES

WHICH ARISE WHEN SEVERAL

PEOPLE USE THE SAME

MOUTHPIECE FOR MULTIPLE

TESTS.