CAB EOS5/300 Panduan Servis - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Servis untuk Pembuat label CAB EOS5/300. CAB EOS5/300 20 halaman.

Replacing Assembly Units

2.6

Replacing the Transport Module

Fig. 6

Removing / mounting transport module 1

Removing

 Remove the tear-off plate/cutter.

 Remove the casing.

 Unplug the connector (1) of the label sensor (2).

 Move the label sensor as far as possible to the operator's side  Operator's Manual.

 Remove screw (3) and 5 screws (4).

Fig. 7

Removing / mounting transport module 2

 Remove control panel.

 Remove the transport module (7) with the printing roller (6) by tilting from the chassis (5).

 Pull the cutter connection cable (8) downward out of the transport module (7).

Mounting

 Mount the assembly units in reverse order.