CAB ER6/300 Panduan Operator - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Operator untuk Pembuat label CAB ER6/300. CAB ER6/300 14 halaman. External rewinder

Start-Up

3.1

 Check the external rewinder for damages in transit and completeness.

Contents of delivery:

•

External Rewinder

•

Clamp

•

2 Rewind Adapters

•

Plate for ER4/210 or Plate for ERx/300

•

Power Cable

•

Documentation

Note!

 Please keep the original packaging in case the device must be returned.

3.2

The rewinder is equipped with a wide range power unit (100-240 V~), so it is possible to use the printer both with a

voltage of 230 V~/50 Hz and with a voltage of 115 V~/60 Hz without changes.

Caution!

Risk of injury by rotating parts!

 Ensure that the power switch (1) is in position „O" (OFF) before connecting the printer to a power

supply !

When switching on the Rewinder starts immediately without or with loose material.

ER4/210

Figure 3

Connecting to power supply

 Connect the supplied power cable (3) to the power input module (2) and to a grounded outlet.

ERx/300