Cisco Nexus 1000V Panduan Penyebaran - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Penyebaran untuk Router Jaringan Cisco Nexus 1000V. Cisco Nexus 1000V 49 halaman. For microsoft hyper-v
Juga untuk Cisco Nexus 1000V: Lembar data (8 halaman), Panduan Penyebaran (25 halaman), Manual (6 halaman), Panduan Instalasi (27 halaman)

Halaman Cetak
Cisco Nexus 1000V Panduan Penyebaran
When the Cisco Nexus 1000V is used to manage the virtual access layer on Microsoft Hyper-V, Logical Networks
and Network Sites are created from the VSM. Network sites are referred to as network segment pools on the VSM
because they are a collection of VLAN and IP subnets: that is, network segments. Figure 10 shows an example of
how a Logical Network and network segment pool (Network Site) are created on Microsoft SCVMM.
Figure 10.

Virtual Machine Networks

A Virtual Machine Network or VM Network provides isolation to virtual machines deployed on the Microsoft Hyper-
V virtual access layer.
A Virtual Machine Network of a specific type is created by the server administrator by requesting a network
resource from the Logical Network, which is a pool of Network Sites or network segments. In the example in
Figure 10, the fabric administrator has created two types of Logical Networks: DMZ and Internal. The server
administrator can now create virtual machine networks of either the DMZ or the internal type.
A virtual machine network defines a routing domain similar to Cisco virtual routing and forwarding (VRF) instances
and can contain one or more virtual subnets. Each virtual subnet defines a Layer 2 broadcast domain.
Microsoft SCVMM 2012 SP1 supports four types of Virtual Machine Network:
VLAN
●
Network virtualization using generic route encapsulation (NVGRE)
●
External (VLAN)
●
Not Isolation
●
In the first release of Cisco Nexus 1000V, only external VLAN-based isolation is supported. Other segmentation
technologies such as NVGRE and VXLAN are not supported in the first release. VLAN-backed network segments
defined on the Cisco Nexus 1000V can be used by the Microsoft SCVMM administrator to create external Virtual
Machine Networks.
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Creating a Logical Network and Network Segment Pool on Microsoft SCVMM
Page 13 of 48