Cisco Nexus 5000 Series Panduan Konfigurasi - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Router Jaringan Cisco Nexus 5000 Series. Cisco Nexus 5000 Series 6 halaman. Configuring ip source guard
Juga untuk Cisco Nexus 5000 Series: Catatan Rilis (26 halaman), Panduan Referensi Cepat (14 halaman), Catatan Rilis (26 halaman), Panduan Referensi (12 halaman), Panduan Pemecahan Masalah (8 halaman), Manual (11 halaman), Manual (6 halaman), Manual (7 halaman), Panduan Pengoperasian (45 halaman)

Halaman Cetak
Cisco Nexus 5000 Series Panduan Konfigurasi
Adding or Removing a Static IP Source Entry
Command or Action
Step 4
show running-config dhcp
Example:
switch(config-if)# show running-config dhcp
Step 5
copy running-config startup-config
Example:
switch(config-if)# copy running-config
startup-config
Adding or Removing a Static IP Source Entry
You can add or remove a static IP source entry on a device. By default, there are no static IP source entries
on a device.
SUMMARY STEPS
1. configure terminal
2. [no] ip source binding IP-address MAC-address vlan vlan-ID interface ethernet slot/port
3. (Optional) show ip dhcp snooping binding [interface ethernet slot/port]
4. (Optional) copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
switch# configure terminal
switch(config)#
Step 2
[no] ip source binding IP-address MAC-address vlan
vlan-ID interface ethernet slot/port
Example:
switch(config)# ip source binding 10.5.22.17
001f.28bd.0013 vlan 100 interface ethernet 2/3
Step 3
show ip dhcp snooping binding [interface ethernet slot/port]
Example:
switch(config)# show ip dhcp snooping binding
interface ethernet 2/3
Cisco Nexus 5000 Series NX-OS Security Configuration Guide, Release 5.0(3)N1(1)
4
Purpose
(Optional)
Displays the running configuration for DHCP snooping,
including the IP Source Guard configuration.
(Optional)
Copies the running configuration to the startup
configuration.
Purpose
Enters global configuration mode.
Creates a static IP source entry for the current interface,
or if you use the no option, removes a static IP source
entry.
(Optional)
Displays IP-MAC address bindings for the interface
specified, including static IP source entries. Static entries
appear with the term in the Type column.
Configuring IP Source Guard