CAB VS 60+ Panduan Operator - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Operator untuk Pembuat label CAB VS 60+. CAB VS 60+ 18 halaman. Label dispenser

Operation

4.2.6 Adjusting the Dispense Plate

The label material must run parallel to the chassis, failing this :

 Loosen screw (2).

 If the material (1) runs away from the chassis, pull the dispense plate a

little out of the guiding (4).

 If the material (1) runs against the chassis, push the dispense plate a little

into the guiding (4).

 Tighten screw (2) .

 Dispense several labels to test the material run.

Fig. 11

Material run

Fig. 12

Adjusting the dispense plate