Cisco Nexus 9000 Series Panduan Instalasi - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Router Jaringan Cisco Nexus 9000 Series. Cisco Nexus 9000 Series 12 halaman. Switch chassis
Juga untuk Cisco Nexus 9000 Series: Panduan Konfigurasi Mulai Cepat (6 halaman), Panduan Konfigurasi (32 halaman), Panduan Konfigurasi (32 halaman), Manual (30 halaman), Menginstal (8 halaman), Panduan Memulai Cepat (14 halaman), Manual (16 halaman)

Installing the Switch Chassis

a) Holding the switch with both hands, position the two rear rack-mount brackets on the switch between the rack or

cabinet posts that do not have slider rails attached to them (see the following figure).

Figure 3: Sliding the Chassis into the Rack

Align the two rear rack-mount bracket guides with

the slider rails installed in the rack.

Slide the rack-mount guides onto the slider rails until

the front rack-mount brackets come in contact with

the front rack-mount rails.

b) Align the two rear rack-mount guides on either side of the switch with the slider rails installed in the rack. Slide the

rack-mount guides onto the slider rails, and then gently slide the switch all the way into the rack until the front

rack-mount brackets come in contact with two rack or cabinet posts.

Front-mount brackets.

Mounting rails on rack or cabinet posts.

Cisco Nexus 9372TX ACI-Mode Switch Hardware Installation Guide

Installing the Switch