Cisco ONS 15600 Panduan Petunjuk Instalasi - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Router Jaringan Cisco ONS 15600. Cisco ONS 15600 14 halaman. Install the bay and backplane connections
Juga untuk Cisco ONS 15600: Mengubah Pengaturan Kartu (14 halaman), Panduan Referensi (29 halaman), Manual (10 halaman), Panduan Referensi (22 halaman)
Halaman Cetak
Chapter 1
Install the Bay and Backplane Connections
•
User-Supplied Materials
The following materials and tools are required but are not supplied with the ONS 15600:
•
•
•
•
•
•
•
•
•
•
•
•
Tools Needed
•
•
•
•
•
•
•
•
•
•
•
78-17203-01
Rear kick plate
–
Side kick plates (2)
–
8-32 flathead screws (18)
–
600-mm kick plate kit (53-2177-XX) (optional)
Front kick plate
–
Rear kick plate
–
8-32 flathead screws (10)
–
Power cable, rated for at least 125-A capacity
Ground cable, rated for at least 125-A capacity
Marking pen
Concrete drill
Listed pressure terminal connectors such as two-hole ring; connectors must be suitable for the
chosen cable
Two-hole power lugs, 0.625-inch hole spacing, 0.25-inch bolt holes (2 for grounding, 4 for each
shelf), for underfloor-routed power cables (Panduit LCCF2-14AZFW-E)
#22 or #24 AWG CAT-5e alarm wires
Straight-through (CAT-5) LAN cables, shielded (if using an external LAN connection)
Male 15-pin D-sub shielded cable (if using the audible [external] alarms option)
EIA/TIA-232C shielded cable (9 pin D-sub to 9 pin D-sub) (2)
75-ohm coaxial cable (BNC connectors on both ends) (optional)
Ladder (optional)
Wire-wrap tool (suitable for #22 to #28 AWG alarm wires)
Wire cutters
Wire strippers
Crimp tool
Scissors
#2 Phillips screwdriver, 6 inches long
3/4-inch socket wrench
Ratchet
6-inch (or greater) ratchet extension (optional)
3/4-inch socket
1 1/8-inch socket
Required Tools and Equipment
Cisco ONS 15600 Procedure Guide, R7.0
1-3