Actulux HCV Series Petunjuk Manual - Halaman 11

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Penggerak DC Actulux HCV Series. Actulux HCV Series 12 halaman. Chain drive

Function of remote control for HCVAR

Note!

The remote control is operated

at a short press per function.

Long pressures will cause shorter

battery life.

By default, HCVAR comes with a paired remote control (item no.# 111890).

One chain drive remember max. 20 pcs. remote controls.

1) Press and hold the "program button" on the chain drive until the

2) Within 5 seconds - press any button on the remote control and its LED indicator lights up.

3) The LED / Buzzer indicator in the chain drive turns off after one flash / beep = the remote

control and chain drive are now paired.

If you need to remove one remote, you have to delete all of them; by pressing the "Program

button" for more than 3 seconds until the LED / Buzzer indicator has been switched on and off

again. Now all remote controls are deleted and you need to pair all of them again.

It is possible to connect a wind / rain sensor wireless to the chain drive.

(See our user manual for wind and rain sensor at www.actulux.com)

Rain sensor # 111960

Wind- & rain sensor # 111961

To access the "Program button" in the drive,

remove the plastic cap on the top of the housing.

LED / Buzzer indicator lights / beeps.

RELEASE THE BUTTON IMMEDIATELY.

Stop

Program button

HCVA/HCVAR

Open

Red LED