Cisco SCE8000 GBE Prosedur Penghapusan dan Penggantian - Halaman 33
Jelajahi secara online atau unduh pdf Prosedur Penghapusan dan Penggantian untuk Router Jaringan Cisco SCE8000 GBE. Cisco SCE8000 GBE 36 halaman. 10gbe platform
Juga untuk Cisco SCE8000 GBE: Panduan Memulai Cepat (25 halaman), Panduan Konfigurasi (18 halaman), Menginstal (21 halaman)
Halaman Cetak
Chapter 9 Removal and Replacement Procedures
Removing a SPA from a SIP
To remove a SPA from a SIP, see
At the SCE# prompt, enter reload shutdown and press Enter to power down the Cisco SCE 8000
Step 1
platform before installing or removing any module.
If attached, remove any cables from the SPA.
Step 2
To remove the SPA from the SIP, unfasten the captive installation screws on the SPA.
Step 3
Grasp the handles of the SPA and pull the SPA from the SIP.
Step 4
OL-26784-02
Figure 9-17
and do the following:
Cisco SCE8000 10GBE Installation and Configuration Guide
Removing a SPA from a SIP
9-33