Cisco SG 300-10P Panduan Memulai Cepat - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Router Jaringan Cisco SG 300-10P. Cisco SG 300-10P 17 halaman. Managed switches
Juga untuk Cisco SG 300-10P: Panduan Memulai Cepat (17 halaman), Lembar data (14 halaman), Spesifikasi (2 halaman), Panduan Pengaturan Cepat (10 halaman), Panduan Memulai Cepat (18 halaman), Panduan Memulai Cepat (17 halaman)

Back Panel

The power port and console port are located on the back panel of the

managed switch.

Power—The Power port is where you will connect the switch to power.

Depending on the model of switch you are using, this may be a power cord

or a power adaptor.

Console—The Console port is where you can connect a serial cable to a

computers serial port for configuration using a terminal emulation program.

Returning the Device to the Factory

Default Settings

To use the

Reset

following:

• To reboot the managed switch, press the

seconds.

• To restore the managed switch configuration to the factory default

settings:

1. Disconnect the managed switch from the network or disable all

DHCP servers on your network.

2. With the power on, press-and-hold the

10 seconds.

button to reboot or reset the managed switch, do the

Reset

button for less than 10

Reset

button for more than

300 Series Managed Switches