CAB HEKTOR 4 Panduan Pengoperasian - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Sistem Penyaringan Air CAB HEKTOR 4. CAB HEKTOR 4 8 halaman. Strip separator

7. Maintenance and Cleaning

The cleaning of the separator from the rests depends on the number of separated boards.

By using a suction device the rests will be disposed permanently. Nevertheless it is

recommended to check regular whether there are rests in the machine. These rests have to be

disposed.

Cleaning of the machine

WARNING !

Before starting any maintenance, disconnect the Hektor 4 from the power

supply and from the compressed air supply !

CAUTION !

The blades are sharp ! Risk of injury !

Fig. 4 Cleaning the device

- Remove the cover. Use the tool including in the contents of delivery.

- Open the door (9) on the front of Hektor 4 by loosening the screw (10).

- Dispose the rests on the blade sheet and in the area under the blade sheet.

Use compressed air if necessary.

- Close the door, tighten the screw firmly.

- Mount the cover. Use the tool including in the contents of delivery.