Cisco Small Business Pro SRP527W Panduan Pengguna - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Router Jaringan Cisco Small Business Pro SRP527W. Cisco Small Business Pro SRP527W 21 halaman. Dot (digital office technology)
Juga untuk Cisco Small Business Pro SRP527W: Panduan Memulai Cepat (17 halaman), Panduan Pengguna (27 halaman)
Halaman Cetak
Section 1. What's in the Box
Section 2. Setting up your system
Running the Self-Install CD
Installing your router
Setting up your Wi-Fi network
Setting up Broadband Backup
Section 3. Remote Working
(working away from your office)
Section 4. Troubleshooting
Section 5. Acronyms, Abbreviations
and Glossary
Previous
Next
Label
Light – solid green
Light – flashing
WLAN
When the wireless transmitter
When there is wireless
is powered ON and
activity on the WLAN
operational.
port.
USB
When the connected USB
When there is a device
device is operational.
failure or unsupported
device.
WPS
When Wi-Fi Protected Setup
Slow flash while setup
(WPS) is operational
is in progress.
Fast flash indicates
setup error.
Using Wireless (Wi-Fi) Networking
Wireless (or Wi-Fi) networking means allowing several
computers to share Internet and network access without
needing cables. Each computer on the Wi-Fi network
receives Internet access wirelessly.
Enabling your Wi-Fi Adaptor
You must enable your personal computer's (PC) Wireless
Network Adapter prior to configuring wireless connectivity.
PC (Microsoft
®
Windows
®
) users
Most PCs have a switch, usually located on the side or front
of the PC. Please set the switch to the ON position (please
refer to your PC manufacturer manual for help in locating the
switch). The switch's status is often indicated by a light on the
PC panel and by the following symbols:
or
You will need to ensure that your Wi-Fi adaptor is enabled by
accessing the Network Connections menu. You can find this
menu by visiting 'Control Panel' and then 'Network and
Internet Connections' (this may vary slightly depending on
your version of Windows).
Section 2. Setting up your system
PC (Apple
®
Mac
®
) users
Mac users must activate AirPort. You will need to access
the Network Menu which can be found by visiting the
Apple menu and then Systems Preferences menu.
If your Mac's AirPort switch is set to OFF, you will see the
following icon on the menu bar:
If your Mac's AirPort switch is set to ON but disconnected,
you will see the following icon on the menu bar:
If your Mac's AirPort switch is set to ON and your Mac is
transmitting, you will see the following icons on the menu
bar, indicating that your Wi-Fi is ON and also indicating
signal strength: