Cisco SRP521W Panduan Memulai Cepat - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Router Jaringan Cisco SRP521W. Cisco SRP521W 17 halaman. Small business managed router srp500 series feature configuration guide initial configuration using xml
Juga untuk Cisco SRP521W: Panduan Konfigurasi (4 halaman)

Halaman Cetak

Front Panel Lights

The following table describes the lights on the front panel of the SRP.

These lights are used for monitoring system activity.

Lights (Green)

POWER/SYS

LAN ports (1–4)

WAN port

(SRP 521W only)

Phone (FXS) ports

(1–2)

DSL CD

DSL Data

(SRP 526W/527W only)

WLAN

USB port

WPS button

Back Panel

The back panel is where you connect the network devices. The ports on

the panel vary depending on the model.

Cisco SRP500 Services Ready Platforms Quick Start Guide (SRP520 Models)

Description

Lights when the SRP has successfully booted and is ready

to use. Flashes when the SRP is booting.

Lights when a link is established. Flashes when there is

activity on the LAN port.

Lights when a link established. Flashes when there is

activity on the WAN port.

Lights when the port is connected to a phone or fax

machine and the SRP is able to make and receive calls.

Flashes when a call is in progress on the port.

Flashes when a DSL service is detected. Lights solid green

when synchronized.

Flashes when there is DSL activity on the line.

Lights when the radio is powered on and operational.

Flashes when there is wireless activity on the WLAN port.

Lights when the connected USB device is operational.

Flashes if there is a device failure or unsupported device.

Lights when WiFi Protected Setup (WPS) is operational.

A slow green flash indicates that the setup is in progress. A

fast green flash indicates a setup error.