Cisco uBR10012 Universal Broadband Router UBR10-FAN-CAB= Panduan Instalasi - Halaman 17
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Router Jaringan Cisco uBR10012 Universal Broadband Router UBR10-FAN-CAB=. Cisco uBR10012 Universal Broadband Router UBR10-FAN-CAB= 26 halaman. Cisco systems cisco ubr10012 universal broadband router installation guide
Halaman Cetak
Removing the Fan Assembly Module
This procedure is applicable to both fan assembly modules (UBR10-FAN-ASSY= and
UBR10012-FAN-PLUS=).
Note
The fan assembly module does not need to be replaced when it is operating normally. If a failure
(SINGLE FAN FAIL or MULTI FAN FAIL) LED illuminates (yellow), use the following procedure to
remove and reinsert the fan assembly module to test the connection. If the failure (SINGLE FAN FAIL
or MULTI FAN FAIL) LED still illuminates (yellow) after removing and reinserting the module, use the
following procedure to replace the fan assembly module.
Prerequisites
•
Required Tools and Equipment
•
•
OL-5093-02
Ensure that the PRODUCT ID LED/switch on the UBR10012-FAN-PLUS= fan assembly module is
illuminated or not illuminated before removing and replacing the fan assembly module.
provides information on the PRODUCT ID LED/switch activation status and compatibility with the
Cisco IOS Release.
Flat-head screwdriver
Replacement fan assembly module (UBR10-FAN-ASSY= or UBR10012-FAN-PLUS=)
Removing and Replacing the Fan Assembly Module
Cisco uBR10012 Universal Broadband Router Fan Assembly Module
Table 2
17