Cisco Unified Communications Manager 8.5(1) Panduan Memulai Cepat - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Router Jaringan Cisco Unified Communications Manager 8.5(1). Cisco Unified Communications Manager 8.5(1) 20 halaman. 850 series and 870 series access routers cabling and setup
Juga untuk Cisco Unified Communications Manager 8.5(1): Lembar data (8 halaman)
Halaman Cetak
- 1. Table of Contents
- 2. Cisco One-Year Limited Hardware Warranty Terms
- 3. Locate the Product Serial Number
- 4. Before Installation
- 5. Connect the Antenna to the Wireless Router (Optional)
- 6. Connect the Power-Over-Ethernet Module to the Cisco 870 Series Router (Optional)
- 7. Typical Installations of the Cisco 850 Series and Cisco 870 Series Routers
- 7. Console Port
- 7. Power Adapter
- 8. Connect the Router
- 9. Install SDM and Configure the Router
- 10. Related Documentation
- 11. Obtaining Documentation and Submitting a Service Request
Chapter 1
Before Installation
Nonwireless Routers
Read the Safety Warnings and Guidelines
Remove the Caution Sticker
Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
1-6
Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
Portions of this guide do not apply to nonwireless models of the Cisco 850 series
and Cisco 870 series routers. Some illustrations show the router with antennas
attached, whereas the nonwireless routers do not have antennas or antenna
connectors on the back panel. However, except for the
the Wireless Router (Optional)"
for wireless and nonwireless router models.
Before you begin to connect your router, read the Regulatory Compliance and
Safety Information for Cisco 800 Series Routers document that is shipped with the
router. This document provides important safety warnings and guidelines.
Locate the yellow caution label that covers the LAN ports. Simply peel off the
label and the LAN ports are ready for use. Be sure that you do not connect ISDN
telephone lines to these LAN ports.
section, the connection procedures are the same
"Connect the Antenna to
78-16262-04