Cab Technology PCU4/2 Panduan Operator - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Operator untuk Pemotong Cab Technology PCU4/2. Cab Technology PCU4/2 20 halaman. Perforation cutter

Printer Configuration

Once the cutter is connected to the printer, the printer will automatically

recognize it on turn on.

The printer can be configured to suit the individual requirements of cut mode

in the „Setup" menu. When the cutter is installed, the „Cutter" menu will

appear.

Notice!

For detailed instructions for configuration  Configuration Manual

of the printer.

For setting the cutter parameters select

-> Machine param.

Setup

Parameter

Cutter

> Cut

position

> Cutting

depth

Notice!

The values of the setup are basic settings for the actual combination

printer/cutter. After changing the cutter or printer a re-adjustment

may be necessary.

Changes required for processing different print jobs should be

implemented additional offsets available in the software.

The offset values from setup and software are added together for

execution.

Meaning

Configuration of the perforation cutter

Offset of the cut position relative to the printed

image

Setting of the perforation depth

-> Cutter

Default