Cisco WS-X45-SUP6-E - Supervisor Engine 6-E Catatan Instalasi dan Konfigurasi - Halaman 26
Jelajahi secara online atau unduh pdf Catatan Instalasi dan Konfigurasi untuk Router Jaringan Cisco WS-X45-SUP6-E - Supervisor Engine 6-E. Cisco WS-X45-SUP6-E - Supervisor Engine 6-E 30 halaman.
Halaman Cetak
SFP Guidelines
Fiber-optic SFP modules also use MT-RJ connectors, as shown in
Figure 11
1000BASE-T SFP Modules
Copper 1000BASE-T SFP modules use RJ-45 connectors, as shown in
Figure 12
1000BASE-T copper SFP modules used with the Catalyst 4500 E-series Supervisor Engine 6-E operate
only in 1000BASE-T mode, or at 1000 Mbps. Copper 1000BASE-T SFP modules use standard four
twisted-pair, Category 5 cable at lengths up to 328.08 feet (100 meters).
CWDM SFPs
You can connect the CWDM SFPs to CWDM passive optical system optical add/drop multiplexer
(OADM) or multiplexer/demultiplexer plug-in modules using single-mode fiber-optic cables with
standard SC connectors.
Figure 5
Figure 13
Optical bore
dust plug
Installation and Configuration Note for the Catalyst 4500 E-Series Supervisor Engine 6-E
26
MT-RJ Fiber-Optic SFP Module
1000BASE-T Copper SFP Module
Figure 13
shows an SC-type connector.
CWDM SFP Module (Yellow-Coded CWDM-SFP-1550= Shown)
Color arrow on label
Color coded bale clasp
shows a CWDM SFP with the optical port dust plug removed.
Receive optical bore
Transmit optical bore
Figure
11.
Figure
12.
78-18337-01