Epson V11H176020 - PowerLite 82c XGA LCD Projector Lembar Spesifikasi - Halaman 13
Jelajahi secara online atau unduh pdf Lembar Spesifikasi untuk Proyektor Epson V11H176020 - PowerLite 82c XGA LCD Projector. Epson V11H176020 - PowerLite 82c XGA LCD Projector 15 halaman. Product support bulletin(s)
Juga untuk Epson V11H176020 - PowerLite 82c XGA LCD Projector: Panduan Pengguna (42 halaman), Panduan Pengoperasian (47 halaman), Panduan Instalasi (19 halaman), Buletin Dukungan Produk (8 halaman)
Halaman Cetak
5. Hold the lamp as shown and pull it straight out.
Note:
The lamp(s) in this product contain mercury. Please
consult your state and local regulations regarding disposal or
recycling. Do not put in the trash.
6. Gently insert the new lamp. If it doesn't fit easily, make sure
it's facing the correct way.
Caution:
Do not touch the glass portion of the lamp assembly. Touching
the glass could result in premature lamp failure.
7. Once the lamp is fully inserted, tighten its screws.
Note:
Be sure to seat the lamp fully and secure the lamp cover. If the
lamp is not properly installed or the cover is loose, the lamp will
not turn on.
8. Lower the lamp cover into place. Then slide the cover closed
and tighten the screw.
9. Reset the lamp timer as described on page 13.
Epson PowerLite 62c/82c Projector
Resetting the Lamp Timer
You must reset the lamp timer after replacing the lamp to clear
the
Replace the Lamp
Note:
Do not reset the lamp timer if you have not replaced the lamp. If
you do, the Lamp Hours will not accurately reflect the number of
hours that the lamp has been used.
1. Connect the power cable and turn on the projector.
2. Press the
button on the remote control or projector
Menu
and select the
Reset
following:
3. Select the
Reset Lamp Hours
see the following:
4. Select
and press
Yes
5. Press
to return to the main menu or
Esc
menu system.
9/05
Epson PowerLite 62c/82c Projector
warning message. Follow these steps:
menu. Then press
. You see the
Enter
option and press
.
Enter
Menu
. You
Enter
to exit the
13
-