Cisco 500 Series Panduan Pengguna - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Titik Akses Nirkabel Cisco 500 Series. Cisco 500 Series 46 halaman. Stackable managed switches
Juga untuk Cisco 500 Series: Manual Informasi Keselamatan (42 halaman), Manual (4 halaman), Mulai Cepat Quide (13 halaman), Panduan Memulai Cepat (21 halaman), Lembar data (5 halaman), Panduan Pengguna (4 halaman), Panduan Pengguna (6 halaman), Manual (40 halaman), Panduan Administrasi (48 halaman), Manual (24 halaman), Pemecahan Masalah dan Pemeliharaan (15 halaman), Panduan Referensi Cepat (7 halaman), Panduan Memulai Cepat (25 halaman)

Your Headset

Base Icon

Connect the Multibase to a Bluetooth Device

The Cisco Headset 560 Series with Multibase can connect to Bluetooth devices such as a mobile phone or

tablet. The headset base appears on your call device as Cisco Headset followed by the last three digits on

your headset serial number.

Note

You can find your headset serial number in the lower right corner on the underside of your base.

Procedure

Step 1

Press the Bluetooth button on the back of the multibase twice to start pairing.

Step 2

Select your headset from the Settings menu on your device.

The Bluetooth LED lights white when pairing is successful.

Your multibase remembers the last-connected device. When you turn Bluetooth off on the multibase, the

connection to the device stops. When you turn Bluetooth on again, the base reconnects to the device.

Procedure

Press the Bluetooth button on the back of the base once to turn it on or off.

The multibase only remembers one Bluetooth device at a time.

Connect the Multibase to a Bluetooth

Connection

The mobile phone icon corresponds with the Bluetooth connection found

at the back of the base. While the icon is of a mobile phone, the base

will connect with any compatible Bluetooth call device.

If you are listening to music through the Bluetooth source, the music

pauses when you place the headset on the base.

Device, on page 11

Cisco Headset 500 Series User Guide

Connect the Multibase to a Bluetooth Device