Cisco 700 series Ikhtisar - Halaman 7

Jelajahi secara online atau unduh pdf Ikhtisar untuk Titik Akses Nirkabel Cisco 700 series. Cisco 700 series 19 halaman. Using profiles
Juga untuk Cisco 700 series: Panduan Memulai Cepat (8 halaman), Panduan Memulai (27 halaman), Panduan Pengguna (9 halaman), Panduan Administrasi (36 halaman)

Halaman Cetak

Call Forwarding (Sweden and Finland)

Call forwarding supplementary service has been added for Sweden and Finland (NET3).

Call forwarding is implemented differently in the European countries. The version

implemented here uses keypad procedures and is only partly ETSI-compliant.

Three-Way Call Conferencing

Cisco 700 series routers can add another party to an active voice call. You can connect three

people using this feature. For more information on conﬁguring three-way call

conferencing, refer to the chapter "ISDN and Analog Telephone Devices."

Data Call Button (Cisco 770 Series Router Only)

The data call button, located on the front panel of Cisco 770 series routers, provides an

alternative to establishing or disconnecting data calls through the command interface. The

data call button performs in Make or Break mode. If no B channels are connected for data,

and at least one B channel is available, the button works in Make mode and attempts to

establish a call. When at least one B channel is connected for data, the button works in

Break mode, disconnecting the call. Table 1-1 summarizes the operation of the Cisco 770

series data call button.

Table 1-1

Current

Status

Switch

Operation

Second Number Fail-Over

Cisco 700 series routers can place a call to a backup telephone number when an outgoing

call is not successful because the receiving side is busy or does not answer. Cisco 700 series

routers support second number fail-over for manual and auto-data calls. The parameters are

set using the set backupnumber command.

Cisco 770 Series Data Call Button Operation Summary

No call up

1 data call

only

Make a

Disconnect

data call

the data call

2 data calls

1 voice

call only

Disconnect

Make a

both data calls

data call

Overview of Cisco 700 Series Routers 1-7

Product Features

2 voice

1 data and 1

calls

voice call

Disconnect

action

the data call