Cisco AIR-AP1142N-E-K9 Panduan Memulai - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Titik Akses Nirkabel Cisco AIR-AP1142N-E-K9. Cisco AIR-AP1142N-E-K9 37 halaman. Autonomous access point

Halaman Cetak

Configuring Basic Security Settings

You can use the Express Security page to create unique SSIDs and assign one of four security types to

them. This illustration shows the Express Security page.

Understanding Express Security Settings

When the access point configuration is set to factory defaults, the first SSID that you create by using

the Express Security page overwrites the default SSID, which has no security settings. The SSIDs that

you create appear in the SSID table at the bottom of the page. You can create up to 16 SSIDs on the

access point.

Using VLANs

If you use VLANs on your wireless LAN and assign SSIDs to VLANs, you can create multiple SSIDs

by using any of the four security settings on the Express Security page. However, if you do not use

VLANs on your wireless LAN, the security options that you can assign to SSIDs are limited because

of the limited Express Security page encryption options. Without VLANs, encryption settings (WEP

and ciphers) apply to an interface, such as the radio, and you cannot use more than one encryption

setting on an interface. For example, when you create an SSID with static WEP with VLANs disabled,